Inconel 718 Pipe Fittings, ASME SB366 Inconel 718 Long Stub, ANSI B16.9 Inconel 718 Welded Buttweld Fittings, Inconel 3d Pipe Bend, Inconel 718 Pipe Elbow, Inconel WERKSTOFF NR.2.4668 Cross Exporter
VISHAL STEEL INDIA is a prestigious association that is generally occupied with offering an extensive variety of Inconel 600/601/625/718 Pipes and Tubes. These UNS N06600/N06601/N06625 Pipes and Tubes hold strength over a broad temperature range, striking for high-temperature capacities where steel and aluminum would respect creep in view of thermally induced precious stone opening.
VISHAL STEEL INDIA is a leading worldwide supplier & exporter of Inconel Alloy ASTM B366 718 90 & 45 Deg Elbows , Inconel Alloy ASTM B366 718 Short & Long Stub Ends , Inconel Alloy ASTM B366 718 Long & Short Radius Elbows , Inconel Alloy ASTM B366 718 Pipe End Caps , Inconel Alloy ASTM B366 718 Equal & Unequal Tees , Inconel Alloy ASTM B366 718 Piggable Bends , Inconel Alloy ASTM B366 718 Concentric & Eccentric Reducer , Inconel Alloy ASTM B366 718 Seamless Buttweld Pipe Fittings , Inconel Alloy ASTM B366 718 Equal & Unequal Cross , Inconel Alloy ASTM B366 718 Welded Buttweld Pipe Fittings , Inconel Alloy ASTM B366 718 Bends , Inconel Alloy ASTM B366 718 Split Tees.
Inconel 718 Butt weld Fittings, Inconel 10d Pipe Bend, Inconel Alloy 718 Short Radius Elbow Supplier, 718 Inconel End Cap, Inconel 718 180 Deg bend, 718 Inconel Reducer, Inconel 718 Equal Tee, Inconel 718 Pipe bend Supplier
Inconel Alloy 718 Buttweld Fittings Specification :
| Inconel Alloy 718 Buttweld Fittings Designation | ANSI B 16.5, BS 1560. BS 10, IS 6392, B-2.1 NPT, API, DIN, JIS. MSS SP 44 |
|---|---|
| Inconel Alloy 718 Buttweld Fittings Standards | ASTM B366, ASTM SB 366, ASTM B564, ASME SB564 |
| Inconel Alloy 718 Buttweld Fittings Range | 1/2"NB TO 12"NB IN |
| Inconel Alloy 718 Buttweld Fittings SCH | 10, 20, 40, STD, 60, 80, XS |
| Inconel Alloy 718 Buttweld Fittings Type | Seamless / Welded/ Fabricated |
Inconel Alloy 718 Buttweld Fittings Chemical Composition :
| Inconel | % | Ni | Cr | Fe | Mo | Nb | Co | C | Mn | Si | S | Cu | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 718 | Min. | 50 | 17 | balance | 2.8 | 4.75 | 0.2 | 0.7 | ||||||
| Max. | 55 | 21 | 3.3 | 5.5 | 1 | 0.08 | 0.35 | 0.35 | 0.01 | 0.3 | 0.8 | 1.15 |
Inconel Alloy 718 Buttweld Fittings Mechanical Properties :
| Condition | Approx Tensile Strength | Approx Service Temp. | ||
|---|---|---|---|---|
| Annealed | 800 - 1000 N/mm2 | 116 - 145 ksi | – | – |
| No.1 Spring Temper | 1000 - 1200 N/mm2 | 145 - 175 ksi | – | – |
| No.1 Spring Temper + Annealed + Aged | 1250 - 1450 N/mm2 | 181 - 210 ksi | -200 to +550°C | -330 to +1020°F |
| Spring Temper | 1300 - 1500 N/mm2 | 189 - 218 ksi | – | – |
| Spring Temper + Annealed + Aged | 1250 - 1450 N/mm2 | 181 - 210 ksi | -200 to +550°C | -330 to +1020°F |
Inconel Alloy 718 Buttweld Fittings Physical Properties :
| Density | 8.2 g/cm3 |
|---|---|
| Melting Point | 1350 °C (2460 °F) |
| Tensile Strength | Psi – 1,35,000 , MPa – 930 |
| Yield Strength (0.2%Offset) | Psi – 75,000 , MPa – 482 |
| Elongation | 45% |
APPLICATION :
TYPES OF INCONEL ALLOY 718 BUTTWELD FITTINGS :
- Inconel UNS No7718 45 Degree Elbow
- Inconel WERKSTOFF NR.2.4 Pipe Fitting
- ASTM B366 718 Inconel Eccentric Reducer
- ASME B16.28 718 Inconel Lateral Tee
- Inconel WERKSTOFF NR.2.4668 Long Stub End
Contact Us for Inconel Alloy 718 Buttweld Fittings Pricing export@vishalsteelind.com